Products New Product Camfering Rolling Trim Grinding Checker Broaching
TFG-100NC | TFG-300NC | GP-1A | 4axis CNC Devering Machine | PRG-1NC | TPG200NC/TPG-500NC

Gear Chamfering Machine

1-AXIS NC GEAR CHAMFERING MACHINE

This model features auto loading with work set into carrier cassette, and rolling chamfering of acute angle tooth end automatically by program set in advance. Simultaneously, it can remove the burr of tooth end by spring type roller cutter.

Features

This model features the rolling chamfering of acute angle tooth end of helical gear with high efficiency.

  1. No cutting depth position stopper is required by NC system.
  2. Cutting depth position is freely set.
  3. Spring type reburring roller has different tooth width of 5mm, thus eliminating set-up.
  4. Automatic cutter positioning method is adopted.
  5. Work drive method is also adopted.

Specifications

  1. Chamfering module 1.5 to 4M
  2. Max, shaft length 300mm
  3. NC device FANUC Mate-PB
  4. Machine sizeW750mm L1950mm H2450mm
  5. Machine weight About 2,600Kg

1-AXIS NC HORIZONTAL TYPE GEAR CHAMFERING MACHINE

This is a machine to perform rolling and chamfering of tooth edge surfaces of gears machined and at the same time removing of burrs and flashes of tooth edge surfaces using a spring type roller cutter.

Fertures

This machine makes it possible to perform rolling and chamfering of tooth edge surfaces of acute angle side (simultaneous machining of obtuse angle side as well will be possible) for helical gears and spur gears.

  1. Due to NC system operated no cutting depth position stopper is required.
  2. Cutting depth position can be set freely.
  3. Spring type deburring roller has tooth width difference of 5 mm and no set-up change will be required.
  4. Direct meshing system.
    (With automatic positioning device for the cutter and the gear)
  5. Work drive system.
  6. Due to horizontalized design of the machine workpiece is mounted under normal state making it readily possible to cope with conveyor transport and other automated lines.

Specifications

  1. Chamfering module 1.5 to 4mm
  2. Cutter back and forth stroke 250mm
  3. NC device FANUC Power Mate-MODEL A
  4. Machine dimensions W1200mm x D2300mm x H2250mm
  5. Machine weight approx.3000kg